[ Home ] [ Up ] [ Feedback ] [ Search ]

Thermo Brick

[ Up ] [ Thermo Brick ] [ Manufactured Stone ] [ Aluminum Siding ] [ Vinyl Siding ]

 

Test Information
Installation Details
Colours
Application Shots
Panel Information

The Brick wall that insulates! The panel is (48" x 16" x 2") and yields an amazing 8.7 / RSI 1.53 R value - the equivalent of three-foot thick solid brick wall - You no longer need to sacrifice energy efficiency to achieve the beauty of brick.

Time is an important factor, THERMO BRICK panels save you time and money in two important ways;

  1. Ease of Installation: One-step installation eliminates the messy mortar mixing, and provides a self-sealing, clean installation. THERMO BRICK's "3-in-1" panel system (composed of plywood sheathing, polyurethane insulation and fired clay brick) is easy to handle - each panel weighs only 35 lbs.

  2. Four Season Application: The panel system can be installed twelve months of the year - cold weather will not delay the installation.

Pricing

Description Square feet Square meter
48" x 16" x 2" Thermo Brick panel US $6.05 US $65.00
20 foot container holds 4,335 402.93 
40 foot container holds 7,009 651.42

 

The THERMO BRICK panel system has many advantages;

An R 8.7 insulation factor.
The traditional beauty of clay brick.
Low cost per square foot.
Ideal for new construction or renovations.
Installation year-round.
6.5 times lighter than full brick.
Installation is quick and easy.
Uses fire retardant polyurethane.
Combines three building elements into one.
Semi-skilled labour only required.
Provides problem-free durability.
Reduces cooling costs in southern climates.
Can be applied directly to wood or steel studs.
Suitable for concrete or pre-engineered buildings.
Rigid, lightweight, interlocking tongue and groove system does not require additional structural support.
Minor repairs are easily completed on the job site.
Approved by Canadian Home Builders, H.U.D.A.C. and the R2000 Association.
CCMC Acceptance No. 12367-R

E-mail

 

 

 

[ Floorings ] [ Doors ] [ Siding ] [ Interior ] [ Exterior ]

Send mail to graham@rttinc.com with questions or comments about this web site.
Copyright © Manufacturers Representative Inc.
Last modified: September 01, 2000