ABDEK TRADING & ENGINEERING LTD.; Recycling plant and machinery for tire car, truck tyre & automobile tire recycling used machinery & plant, used pet machinery, equipment , one stage injection stretch blow moulding machines, two stage injection stretch blow moulding machine and preform injection moulding machines

Florenzer Str. 54
50765 Cologne
Germany

Tel: +49 (0)221 70 89 137
Fax: +49 (0)221 70 68 48
_e-mailxa.gif - 25129 Bytes

Specification of one recycling plant for nominal capacity of 5000 kg/h.
The owner of the plant has produces 4000 kg/h.
Plant is designed for tire of car, truck and industrial rubber as well.
These facilities are made in Nevada (USA) for Germany and has very modern design.
The line is complete.
You can inspect this plant upon appointment in Germany, dismantled.

Model SK 5T
S&K Engineering fabricated the following tire reduction system engineered to recycle passenger car tires and truck tires
as well as industrial rubber in an in integrated reduction process to undamaged rubber granules for industrial use.

System included the following future:
1) One step shredding of passenger car tires mixed with truck tires to a tire chip of approx. 2 to 3 inches diameter.
The primary shredder reduces the complete tire without separating the steel sidewalls from the tire
(The steel and fluff separators enable to separate fluff and steel)
Minimal man power requirements, one operator to feed, and one operator to check the fluent operation at the discharge production.

2)- The turbine pulverizer reduces the tire chips to clean undamaged crumb rubber in controlled sizes ranging from 3 mm to 100 mesh
3)- The system produces rubber granules, which are totally free from steel and nylon fluff.
4)- The steel and fluff separators enable the operator to sales of the product, or the steel can be direct to reenter to
assist in the reduction of industrial rubber.
5)- The system filter incorporates the latest stand of technology in dust control
6)- The noise emission does not exceed 85 decibels
7)- The primary shredder is built to reduce 600 passenger car tires per hour (6 tons)
or about 3 tons mixed tires.
8) Year made 1995.

Choose Machine Category
One Step PET Stretch Injection Blow Moulding	PET Preform Injection Blow Moulding Machine	Two Step Stretch Injection Blow Moulding	Re- heat Blow Moulding Machine PET bottle
Equipment	Compressor	Chiller	PET Dryer

Choose Machine Category

One Step PET Stretch Injection Blow Moulding

PET Preform Injection Blow Moulding Machine

Two Step Stretch Injection Blow Moulding

Re- heat Blow Moulding Machine PET bottle


Item#	Made by	Type	Year made	Capacity	Comments
101	Nissei	ASB650	1980	1100	up to 3 liter containers
102	Nissei	ASB650H	1988	1500	in good operating condition
103	Nissei	ASB1200	1980	3000	up to 1.5 liter containers, includes 500ml mineral water bottle molds


Item#	Made by	Type	Year made	Capacity	Comments
131	Husky	H388P	1984		180 screrw & shooting pot, take-off robot, hopper, loader, dryer
132	Husky	XL225	1986/87		Robot, hopper, loader, dryer
133	Husky	XL720P	1984		in very good condition, hopper, loader, dryer
134	Husky	XL620P	1984		Shot 2042 cm³, Preform conveyor, material dryer,1 ton hopper & mould dryer
135	Husky	XL720P	1982		Shot 2042 cm³, prefprm conveyor, material dryer,1 ton hopper, mould dryer
136	Krupp	P25	1988		Take-off robot,cooling conveyor, PET dryer, hopper, loader, mould dryer& mould dryer
137	Krupp	P25	1988		Take-off robot, cooling conveyor, PET dryer, hopper, loader
138	Krupp	P50	1988		Take-off robot, PET dryer, hopper, loader& mould dryer
139	Krupp	P50	1989		robot, cooling conveyor, PET dryer, hopper, loader
140	Krupp	P50	1988		robot, cooling conveyor, PET dryer, hopper, loader& mould dryer
141	Krupp	CM335	1985		Take-off robot, cooling conveyor, PET dryer, hopper, loader, elevator, mould box
151	Cinninnati	250-48	1978	1,36 kg	Wide platens
141	Krupp	CM335	1985		Take-off robot, cooling conveyor, PET dryer, hopper, loader, elevator, mould box
161	Husky	SX600	1994		96-cavity mould 42 grams, BPF with PET-dryer, hopper, chiller, 3-position robot
162	NESTAL	Neomat	1988		complete with 32-cavity mould with preform 42 grams BPF, dryer, hopper, robot, , mould dehumidifier

Item#

Made by

Type

Year made

Capacity

Comments

104

B&G

UWM- 4

1993

4000

wide mouth capability,

105

Cincinnati

RHB- W

1988

4500

excellent condition,

106

Cincinnati

RHB7

1981

5500

Including preform loaders

107

Krupp

B40

1983

4000

108

Krupp

B66

1995

6600

produced only 8000 hours!

Item#

Made by

Type

Year made

Capacity

Comments

153

MAG

SSB- 20

1987

4 sets of 2 cav. moulds, preform feeder,compressor, chiller

154

Sidel

SBO6/10

1989

moulds

155

Krupp

B80

1986

mould for 1,5 litre petaloid

156

Dynablow

DB- 20

1991

2-cavity blow mould 1,5 litre oil bottle

157

MAG

SSB-20

1988

2-cavity 1,0 litre oil bottle mould.

158

Dynablow

DB- 30

appr. 1995

159

Sidel

SBO4/620

1997

compressor, chiller

160

Krupp

B25

1991

2-cavity blow mould 1,5 litre oil bottle

Item#

Made by

Type

Year made

Capacity

Comments

176

3920

Chromatograph with digital control

177

Tester-lab, top load

178

1100

Tester-lab, top wall thickness

179

Tester-lab, burst

180

MKy

Melt viscometer

181

RDY

Pump-vacuum, lab type

182

Custom

Teste-test station w/hot water

186

Excel/100

coder-date, W/controls

Item#

Made by

Type

Year made

Capacity

Comments

163

Staubil

VGD2610W4

1986/89

Booster compressor(X2) 8 bar in 40 bar out, 1000 N/M3 per hour

164

Bellis

VH9N3H

1990

Oil free high pressure, 40 bar 329 cfm

165

Reavell

VMP36

1988

Lubricated 32 bar, 150cfm

166

Atlas Copco

2S2C20N

1988

Oil-free compressor, 32 bar 132cfm

167

B/WADE

6115

1989

Screw compressor & CD150AA air dryer, 10 bar, 426 cfm

168

B/WADE

622010A

1993

Screw compressor, acoustic box, 24.9 cbm/min, 10 bar, CD300

169

Ingersoll

JH7272

High pressure blowing compressor

170

171

172

173

174

175

Atlas Copco

1991/92

30 bar

Item#

Made by

Type

Year made

Capacity

Comments

176

GWK

KCW

133,000 KJ/h

177

GWK

KCL50

53KW(45,580Kcals)

178

GWK

KCL90

106KW (91,160 Kcals)

179

GWK

KCL90

110KW(94,600 KCals)

180

Tricool

TEC90120

1993

104KW(89,440 KCals)

181

Tricool

Trim600

175KW (135,020 KCals)

182

Ciat

CZ700A800

1996

with MRS1-4.1, circa 150 KW cooling capacity

183

Conair

MCA22

1988

20,000 KCals

184

F&R

WT/05

1984

Cooling towers 252.000 Kcal (295 KW, 10,080 gallons/h

Item#

Made by

Type

Year made

Capacity

Comments

185

Conair

D200H

1986

70-120 kg/h

186

Conair

D400H

1987

140-240 kg/h

187

Conair

D600H

1986

205-360kg/h

188

1- Screw conveyor: Diameter 150 mm Length: 2000 mm Power: 1.5 KW	2- Elevators 2 pieces Width 5000mm Length: 3000 mm Power: 1.5 KW	3- Vibrating Channel Width: 700 mm. Length: 1000 mm Power: 2 X 0.15 KW
4- Magnet Cylinder Diameter: 400 mm Width: 1350 mm Power: 1.5 KW	5- 2 shaft Shredder Length: 2500 mm Width: 1350 mm Power: 200 KW	6- Cyclone with discharger, compressor and dost collector Diameter: 1800 mm Length: 3000 mm Power: 20 KW
7- Pulverising Height: 3500 mm Length: 2000 mm Width: 2000 mm Power: 110 KW	8- Hydraulic aggregate with oil cooling Power: 250 KW	9- Vibrating sieve Length: 9000 mm Width: 1200 mm, Power: 15 KW
10- Cup Sieve Length: 4000 mm Width: 150 mm Power: 1.5 KW	11- Sorting Sieve Length: 2500 mm Width: 1000 mm Power: 2 KW	12- Vibration Sieve Length: 2200 mm Width: 900 mm Power: 0,75 KW
13- Transport Band Length: 10000 mm Width: 600 mm Power: 3 KW	14- Transport Band Length: 4000 mm Width: 1250 mm Power: 5 KW	15- Transport Band Length: 8000 mm Width: 600 mm Power: 3 KW
16- Bag filling Station with screw conveyor Power: 0.75 KW Diameter: 77 mm	17- Control Cabinet

109	Nissei	ASB650HT	1981	1500	with mould, dryer, hopper
110	MAGIC	BMA58/10	1995	----	2 sets, 10 cav. molds 1,0 ltr oil bottle square- dryer, loader, hopper !
111	Nissei	ASB650H	1980	1500	0.25 - 4.0 ltr, reconditioned
112	Nissei	650H	1980	1500	0.25 - 4.0 ltr, mold 6 cavity 2 litre 51 g, hopper, loader, dryer
113	Nissei	ASB650H	1984	Modified	PET dryer, compressor, chiller, turn-key, 4 cav. 5 lit moulds, round and squre, 120g
114	Nissei	650H	1980	1500	0.25 - 4.0 ltr, hopper, loader, dryer, contact relay
115
116	Nissei	650EXH	1987	wide-mouth jar	hopper, mould 510 mm daylight, large bottle, .025-19 ltr
117	Nissei	650EXH	1983	wide-mouth	moulds: 8cav 1,5 ltr, 4 cav 5,0 ltr & 7,0 ltr; dryer, compressor, chiller, air tank
118	Nissei	650NHII	1992	0.25-3.0 ltr	moulds: 8 cav 1,5 ltr, 4 cav 5,0 ltr; hopper, dryer, compressor, chiller
119	Nissei	650H	1993	0.25-4.0 ltr	moulds:1,5 litre 44 g, & 1.0 litr 30 g; hopper, resin dryer, compressor, chiller, miould dryer
120
121
122
123
124
125

ABDEK TRADING & ENGINEERING LTD.

Used Tyre Recycling & PET Machinery & Plant