Hip/Valley Sections Enter Pitch Data Enter PITCH as RISE over RUN Enter PITCH as ANGLE (Degrees) MAJOR PITCH : Rise or Angle = (Not required in ANGLE MODE) Run = MINOR PITCH : Rise or Angle = (Not required in ANGLE MODE) Run = Plan Angle between Eaves/Ridges = Enter Rafter Depths Common Rafter Depth = Hip/Valley Rafter Width =

Backing Angles Hip/Valley Pitch Angle = Major Backing Angle = Minor Backing Angle = Sleeper Bevel Angle = Hip/Valley Shift-Drop Major Plumb Backing Angle = Minor Plumb Backing Angle = Major Side Width = Minor Side Width = Shift about Centerline = Hip Drop = (Cross Section) Valley Trough Depth = Working Point offset along Length = Valley match Common Rafters Minimum Valley Width = Bevelled Upper Shoulder Dimensions Major Side Valley Depth = Minor Side Valley Depth = Major Side Width = Minor Side Width = Trough to Bottom Shoulder of Valley = Bevelled Bottom Shoulder Dimensions theoretical Bottom Shoulder to Ridge, d = Major Side Width = Minor Side Width = Valley Stock Depth = Optimizing the Valley Depths Valley Stock Depth Shoulder to Ridge Depth, d Width for selected Depth =

Valley Rafter intercepts Beam